GRAN-PRIX XL is an innovative floor maintenance solution. With its versatile, acrylic copolymer based formula, it is the perfect floor finish for all maintenance systems. Gran-Prix XL is an excellent all-systems floor finish, high in solids, providing durability and greater resistance to scuffing, soiling and heel marking. Use Gran-Prix to improve the overall appearance of all floor types. For use on vinyl, vinyl asbestos, vinyl composition, asphalt, linoleum, rubber, hardwood, sealed cork, sealed wood, sealed concrete, sealed terrazzo and the so called “no-wax floors”. Environmentally Friendly: A.P.E. free. Multi-use: May be used with ultra high speed burnish, dry-bright and spray-buff systems and on all resilient and non-resilient floors except unsealed wood. Durable: Resists scuffs, scratches, heel marks, etc. Slip resistant: Produces a safe, slip-free surface. Easy to remove: Readily removed using conventional strippers. Should be used to protect and enhance the appearance of high profile area floors. May be applied to all resilient and non-resilient floors except for unsealed wood and cork. Preparation: Before your initial application, the floor must be stripped of any old finish and rinsed thoroughly with potable water and allowed to dry. Sealing the floor is recommended prior to applying a floor finish. Application: Using a clean mop and bucket, apply 1-3 coats (depending on the porosity of the floor) allowing the floor to completely dry between coats, at least 30 minutes or more. Maintenance: Sweep or dry mop frequently. Wet mop or auto-scrub periodically with a properly diluted neutral detergent. Scrub and recoat worn traffic areas as required. Spray buff as needed. Remove any surface dirt and dust with a treated mop. Wet mop or auto-scrub periodically with a neutral detergent. Scrub and recoat worn traffic areas as required.