Developed for use in high profile areas where the ultimate “wet look” gloss and durability are desired. A high solid content builds the required film thickness with fewer coats, producing a safe, slip-free surface. Should be used to protect and enhance the appearance of high profile area floors such as showrooms, foyers, reception areas, lobbies and other areas in shopping malls, airports, hospitals, nursing homes, universities, theatres and commercial buildings. May be applied to all resilient and non-resilient floors except for unsealed wood and cork. Will dry in as few as 15 minutes. Excellent durability; resists scuffs, scratches, heel marks, etc. Excellent leveling and gloss; non streaking; no mop drag during application. Readily removed using conventional strippers. Able to apply many coats in a small time frame. Using polymer technology. A.P.E. and zinc free. ECOLOGO Certified. ... More Info >

GRAN-PRIX XL is an innovative floor maintenance solution. With its versatile, acrylic copolymer based formula, it is the perfect floor finish for all maintenance systems. Gran-Prix XL is an excellent all-systems floor finish, high in solids, providing durability and greater resistance to scuffing, soiling and heel marking. Use Gran-Prix to improve the overall appearance of all floor types. For use on vinyl, vinyl asbestos, vinyl composition, asphalt, linoleum, rubber, hardwood, sealed cork, sealed wood, sealed concrete, sealed terrazzo and the so called “no-wax floors”. Environmentally Friendly: A.P.E. free. Multi-use: May be used with ultra high speed burnish, dry-bright and spray-buff systems and on all resilient and non-resilient floors except unsealed wood. Durable: Resists scuffs, scratches, heel marks, etc. Slip resistant: Produces a safe, slip-free surface. Easy to remove: Readily removed using conventional strippers. Should be used to protect and enhance the appearance of high profile area floors. May be applied to all resilient and non-resilient floors except for unsealed wood and cork. Preparation: Before your initial application, the floor must be stripped of any old finish and rinsed thoroughly with potable water and allowed to dry. Sealing the floor is recommended prior to applying a floor finish. Application: Using a clean mop and bucket, apply 1-3 coats (depending on the porosity of the floor) allowing the floor to completely dry between coats, at least 30 minutes or more. Maintenance: Sweep or dry mop frequently. Wet mop or auto-scrub periodically with a properly diluted neutral detergent. Scrub and recoat worn traffic areas as required. Spray buff as needed. Remove any surface dirt and dust with a treated mop. Wet mop or auto-scrub periodically with a neutral detergent. Scrub and recoat worn traffic areas as required. ... More Info >

A.P.E. free. Odour free. High solids: Excellent durability; resists scuff, scratches, heel marks, etc. Deeper gloss: Superior appearance. Wet look. Produces a safe, slip-free surface. Easy to apply: Excellent leveling and gloss; non-streaking; no mop drag. Readily removed using conventional strippers. Able to apply many coats in a small time frame. Should be used to protect and enhance the appearance of high profile area floors such as showrooms, foyers, reception areas, lobbies and other areas in shopping malls, airports, hospitals, nursing homes, universities, theatres and commercial building. May be applied to all resilient and non-resilient floors except for unsealed wood and cork. ... More Info >

Provides diamond-like brilliance, clarity and durability. Advantages include a faster, early cure time, better buff response, reduced marking, scuffing and scratching, and improved dirt resistance over other scrub and recoat products. Off-white in color with an ammonia scent. For use as hard surface finish. Cures on the floor faster than traditional floor coatings. Resists dirt embedment, black heel marks, scratching and scuffing. Provides better buff response. Responds well to 175 through 1500 RPM equipment Will work with UHS equipment. ... More Info >

● No rinse floor cleaner 
● Patented technology that micro-textures quarry tile floors, improving the slip resistance of the floor
● Does not shorten the life of the floor during traction treatment
● Deep cleans the floor during traction treatment
● Use diluted for effective daily cleaning
● Use on quarry tile, porcelain, glazed ceramic tile and other unglazed ceramic tile floors
● Not for use on wood, cork, floors with finish, marble, terrazzo, linoleum, or aluminum
 

● Exhibits exceptional gloss, leveling and long-lasting durability
● Long-lasting, high gloss sealer finish specifically formulated for stone floors
● Product seals and finishes, can be applied, maintained and removed like any conventional finish
● Offers excellent adhesion to new or worn stone flooring
● One-product solution for multiple stone substrates, including marble, terrazzo, granite, slate, quarry tile, brick, unglazed ceramic, Mexican tile, and others
● Slight ammonia scent